#TechExchange: 5G, The Next Generation Network Taking Over Industries

2

While Econet may have spoken too early on their 5g technology deployment, 2 years ago, Zimbabwe and other African economies are currently being anchored by 3G and the latest 4G networks for all the telecommunication purposes. As the world continues to move towards convergence, 5G is already being rolled out in first world countries. The Next Generation Networks falling under the evolving Long-Term-Evolution broadband networks are all expected to provide robust communication and most of all fierce speeds.

By Eng. Shingie Levison Muringi

Given that 5G is still in its infancy, work also remains relative to channel modeling, radio architecture definition and chip-set development before the first commercial systems will be deployed. However, there are certain trends and requirements already agreed upon and problems to be solved that will lead to final 5G systems.

Let’s consider 5G access systems at microwave and millimeter wave frequencies. One of the major hurdles in implementing radio access at microwave frequencies is overcoming the unfavorable propagation characteristics. Radio propagation at these frequencies is highly affected by atmospheric attenuation, rain, blockage (buildings,                                                                                           people, foliage, etc.) and reflections.

Microwave point-to-point links have been deployed for many years, but these are generally line-of-sight systems. The fact that they are stationary makes the link manageable, and systems have been developed in recent years that support very high throughput using high order modulation schemes. This technology continues to evolve, and we will leverage the microwave link technologies into 5G access.

5G 2

5G Base Stations

Early in the cycle, it has been acknowledged that adaptive beam forming will be required to overcome the propagation challenges for access systems. Unlike point-to-point systems, beam forming will need to adapt to users and the environment to deliver the payload to the user. It is generally agreed in the industry that hybrid MIMO systems will be used in the microwave and low millimeter wave bands, while in V- and E-Bands, where bandwidth is plentiful, the systems will likely only employ beam forming to reach the required throughput goals.
In 5G transmission systems, the receiver can be envisioned as the reverse. The MIMO coding is performed in the digital section, along with the typical digital radio processing. There may be a multitude of MIMO paths processed in the digital section from the various data streams feeding the antenna system. For each data stream, the D/A converter converts the signal into analog at either a baseband or IF frequency, depending on the selected architecture.

The signal is up-converted and split into the constituent RF paths to feed individual antennae. In each RF path, the signal is processed to set the gain and phase to form the beam out of the antenna. While the block diagram is simplistic, the system challenges and trade-offs are complex. In this short treatment of the topic, only a few issues will be discussed, but let’s focus on the architecture and radio challenges. It is critical to design this system with power, size and cost in mind from the start to bring these systems to reality.

MIMO transmitter functional block diagram

MIMO transmitter functional block diagram

While such radios can and are being built today for prototype 5G systems using discrete (mainly GaAs) devices from Analog Devices (ADI) and our peers, we need to bring the same high levels of integration to bear in the microwave space as what has been implemented in cellular radios. High integration and high performance make a tough problem for the industry to solve. But integration alone is not the solution to this problem facing the industry. It requires smart integration.

When we think of integration, we need to first consider architecture and partition to leverage the benefits of integration. In this case, mechanical and thermal design also need to be considered as the circuit layout and substrate are interrelated. First of all, an architecture conducive to integration needs to be defined. If we consider the examples of highly integrated transceiver ICs for cellular base stations, many use a zero IF (ZIF) architecture to either eliminate or minimize the filtering in the signal path.

Particularly at microwave frequencies, one must minimize the loss in the RF filters, as RF power is expensive to generate. While ZIF will reduce the filter issue, the trade-off is LO suppression, shifting the problem from physical structures to signal processing and algorithms. Here we can leverage Moore’s Law, whereby passive microwave structures do not follow the same scaling dynamics. It is necessary to take advantage of the ability to optimize analog and digital simultaneously to reach our goals.

There are many algorithms and circuit techniques that have been employed at cellular frequencies that may benefit the microwave space.Next, consider the semiconductor technology requirements. As mentioned above, state-of-the-art microwave systems are generally implemented with GaAs components. GaAs has been the mainstay of the microwave industry for many years, but SiGe processes are overcoming the barriers of high frequency operation to rival GaAs in many of the signal path functions.

The Then Econet Wireless Zimbabwe Chief Commercial and Customer Services officer Mr Stanley Henning speaks of 5G technology at Econet Wireless Zimbabwe

High performance microwave SiGe BiCMOS processes enable a high level of integration required for these beam forming systems, encompassing much of the signal chain as well as auxiliary control functions. GaAs PAs may be required, depending on the output power required at each antenna. However, even GaAs PAs are inefficient at microwave frequencies, as they are generally biased in the linear region. Linearization of microwave PAs is an area ripe for exploration in the 5G era, more than ever before. What about CMOS? Is it also a contender?

It is well documented that CMOS is well suited for high volume scaling and is being proven in WiGig systems at 60 GHz. Given the early stage of development and uncertainty of use cases, it is difficult to say at this point if or when CMOS will be a technology choice for 5G radios. Much work needs to be done first in the area of channel modeling and use cases, to form a conclusion on radio specifications and where microwave CMOS may fit in future systems.

5G 1

Generational Networks vs Improvements In Speeds

The final consideration of 5G systems is the interdependency of the mechanical design and RFIC partitioning. Given the challenges to minimize losses, the IC needs to be designed with the antenna and substrate in mind to optimize the partition. Below 50 GHz, the antenna will be part of the substrate, and it is expected that the routing and some passive structures may be embedded in the substrate. There is a body of research ongoing in the area of substrate integrated waveguides (SIW) that looks promising for such integrated structures.

In such a structure it will be possible to mount much of the RF circuitry on one side of the multi-layer laminate and route to the antennae on the front face. The RFICs may be mounted in die form on this laminate or in surface-mount packages. There are good examples in industry literature of such structures for other applications.

The antenna elements and spacing become small enough above 50 GHz to possibly integrate the antenna structure in or on the package. Again, this is an area of ongoing research that may push 5G systems forward. In either case, the RFIC and mechanical structure must be co-designed to ensure symmetry in routing and minimize losses. None of this work will be possible without powerful 3D modeling tools for the extensive simulations required for these designs.
While this is a brief perspective on the challenges 5G brings to the microwave industry, there will be boundless opportunities to bring forth RF innovations in the coming years. A rigorous systems engineering approach will yield the optimum solution by leveraging the best technologies throughout the signal chain, developing processes and materials, creating design techniques and modeling, and defining high frequency test and manufacturing. All disciplines will play a role in reaching 5G goals.

Analog Devices brings a strong contribution to the 5G microwave effort with its unique “bits to microwave” capability. ADI’s broad technology portfolio and continued RF technology advances combined with its rich history in radio systems engineering puts the company in a position to pioneer new solutions for designers at microwave and millimeter wave frequencies for emerging 5G systems.
It is an exciting time to be an RF engineer in the wireless industry. 5G is just starting and there is much work ahead to realize commercial 5G radio networks by 2020.

NetOne Reaches Boiling Point, Four Directors Suspended

Previous article

What Is iCloud?

Next article

Comments

Leave a reply

Your email address will not be published. Required fields are marked *